Hi all,
I have been reading the discussion about our NuFletch products and simply want to comment about what I have been reading. NuFletch is new and it is very easy to think that adding weight to an arrow will destroy arrow flight and bring about unwanted changes in FOC. Even I was skeptical about the product when I was developing it. I take my bow hunting seriously and don't want to discuss anything that won't make me more successful, it's already hard enough to get close to the animal why do I need something that makes my arrow fly poorly. "If you really knew me you would understand that I don't promote anything that does not make me more successful in the field or range (PERIOD)" What is important to understand that is by cutting the arrow down you have done some good things to the arrow. If for example you have a .006 arrow, that is priced good for us as hunters but really not as straight as we would like, NuFletch immediately allows you to trim 2.75" of carbon away from each end. This will help to true that arrow (good thing) Once cut, the arrow is stiffer, that again is not a bad thing. The most common misunderstanding here is that the stiffer spine will perform poorly. NOT TRUE.. FACT: you may and I say MAY need to re-tune your set up for the new shaft. We absolutely recommend paper tuning after installing NuFletch to be sure you are shooting a bullet with the new arrow. This ensures that the bow and arrow configuration is correct... simple enough to adjust the rest. Remember, you may not have to touch a thing! Now for FOC. #1 Question we have: Does installing NuFletch mean that I will have to add to my front end to accommodate for FOC? Answer: NO... WHY?
the reduced arrow oscillation you now have with the NuFletch arrow will provide you with a dynamically balanced arrow that will fly flatter and more accurately than your normally fletched arrow. FOC has not been diverted enough to become a factor. Understand, the reduced oscillation in the arrow will deliver the performance you desire as a target shooter or hunter. NuFletch will allow a heavier arrow to oscillate less, fly more efficiently and deliver the kinetic punch we desire as hunters down range where it is needed. ("I understand that all that have not shot this product do not believe what I say at this point") I too did not expect the arrow to perform well when I built the product... I was WRONG... NuFletch is a product that you have to shoot to understand. I have asked many people in the industry that hunt for a living to shoot the product in 2012 on film and see if it works for them. Please visit our website in the next week or so to hear from the folks that have shot the product. Also please look through the photo gallery to see the animals that don't like NuFletch at all
...
NuFletch is new and what I want everyone to understand is: I know we all want to shoot more and fletch less. We want to be more accurate, travel around and not be bothered by vane damage and Lord knows we all want more penetration and harder hitting arrows down range. On a Saturday morning in my home state I sat in a tree one morning, I had already taken 7-8 deer with NuFletch and it was then it hit me... I looked over at my bow hanging on the tree next to me and I felt the freedom of knowing that I was free from fletching, I had an arrow that delivered punch, accuracy, performance and I could fix it instantly in the field.... DONE>>>
Price: yes it is pricy to build this product, I am focused to bring this price DOWN and I promise I will.... If you would like to try this product give me a call at our office and I will get you a sample to shoot for yourself... after all, as a bowhunter...I know you need to see to believe.... that's cool with me!
Thanks Ohio, hunt safe!
John
