Switchback tuning issues

[RBWD]

Have a switchback ld. Had string replaced last year. Made a few slight adjustments while French tuning a week ago and everything was spot on now hitting 3-6 inches right. French tuned again everything was great now today hitting right again and arrow flight seems a little wacky every few shots. While looking down the bow my sight seems to far left. Any advise would be helpful

 

[jagermeister]

Have you checked for fletching contact yet?

 

[Milo]

Rest?
Arrow spine?
Vane orientation?
Centershot measurement?

 

[RBWD]

Rest?
Arrow spine?
Vane orientation?
Centershot measurement?

Arrow spine is correct center shoot measurement is 5/8 off riser to center of arrow vanes are good.

 

[RBWD]

Don't believe there is any contact. Bow shot great all last year after the new string now seems like there is an issue. 31.5 draw 67- 70 pounds using beaman pro Hunter 300

 

[Milo]

With the limited information available I'm going for can lean adjustment. If you shooting right and your pins are left them adjust the right

 

[RBWD]

Your saying cam lean correct?

 

[RBWD]

Looking down the bow it's my understanding that lining the rest sight and center off riser with the string they should all be relatively inline when properly tunes correct

 

[Milo]

Not necessarily. I'm going to suggest you shot that through paper and let us know the results.

 

[RBWD]

I plan on that in the am tomorrow I'll get back to you

 

[RBWD]

using this chart it would be B. Shot about 6 times all the same

 

[RBWD]

I believe I have it takin care of thanks for your help

 

[jagermeister]

I believe I have it takin care of thanks for your help

Good to hear. So what was the problem?

 

[RBWD]

Few issues the rat was a little low but the cam was out of time a touch also

 

[RBWD]

The rest