Yes. Just little differences from yours. Same barrel and that is what counts. I get down to .5" groups with reloads.
Pick your bullet and do a ladder test. Right now I am using 55gr Vmax with 24.5grains of TAC.Beener what load are you using if you don't mind me asking?
Pick your bullet and do a ladder test. Right now I am using 55gr Vmax with 24.5grains of TAC.
I've never seen a rifle that wouldn't shoot Vmax bullets. I took a tour of the Hornady plant and seen the Vmax bullet making machine. Quite the show. Since we are a Hornady Dist. we got a VIP tour.
Same could be said of Nosler an Sierra in my camp.I've never seen a rifle that wouldn't shoot Vmax bullets. I took a tour of the Hornady plant and seen the Vmax bullet making machine. Quite the show. Since we are a Hornady Dist. we got a VIP tour.
Same could be said of Nosler an Sierra in my camp.
The only truly crappy stuff has been Winchester and Remington bagged stuff.
The .224 Winchester JHP's were absolute crap. No matter the rifle....4moa or larger.
The .224 Winchester JHP's were absolute crap. No matter the rifle....4moa or larger.
Depends on the bullet design if I can go below 55 grains or not. Also, mine is an 18" so that makes it handle the lighter bullets a tad better. The best accuracy comes from 69gr Sierra Match Kings and Nosler Custom Comps but they are not hunting bullets.The Hornady 50gr Vmax was too fast and light out of my 20'' 1/8 twist. It was all over the place. I've been shooting some Hornady match 63 gr BTHP and they're half MOA without trying hard.