Trolling 5cm flicker shad 2.7 - 3mph @ 55' back to start with. I have a few general areas I hit first thing. As soon as I get a keeper, mark that spot and pound it. I dont stray more than 100 yards from it, usually running a paperclip pattern around it. If it dries up, hit other areas and repeat. Then return to those productive spots later. You can run boards out there successfully, but it gets kinda tight when guys see you netting. And its generally 6-7 fow wherever you run, so your baits are hitting bottom, and do get snagged up occasionally, therefore i run 30lb powerpro to my locksnaps, no mono. When I get snagged up, throw motor in neutral, real everything up, and get right above it and 99% of the time it pops free. I run 8.5 foot ML Denali Myriads out the sides and a couple spinning rods out the back. One around 65' so it clears the side rods. Then I run a propwash rig, maybe 12' behind the boat with a deeper diver, usually a 5cm Flicker minnow. That rig always gets a few keeprrs every tripWhat sorta program ya run for the saugs at Indian ? Erie weather keeps being a bitch and I haven't went much this spring . Been debating about trying Mosquito for eyes/crappie or Indian for saug/crappie . Both are a decent drive from me .